SSH

Hollow Section Steel Tubes
Confirming To IS 4923/1997
Dimensions and Properties of Square Hollow Section
Designation Depth or Width Thickness (T) Weight
D x B x T mm mm mm kg/m
25.0 X 25.0 X 2.6 25.00 2.6 1.69
25.0 X 25.0 X 3.2 25.00 3.2 1.98
32.0 X 32.0 X 2.6 32.00 2.6 2.26
32.0 X 32.0 X 3.2 32.00 3.2 2.69
32.0 X 32.0 X 4.0 32.00 4.0 3.19
38.0 X 38.0 X 2.6 38.00 2.6 2.75
38.0 X 38.0 X 2.9 38.00 2.9 3.03
38.0 X 38.0 X 3.2 38.00 3.2 3.29
38.0 X 38.0 X 3.6 38.00 3.6 3.63
38.0 X 38.0 X 4.0 38.00 4.0 3.95
49.5 X 49.5 X 2.9 49.50 2.9 4.07
49.5 X 49.5 X 3.6 49.50 3.6 4.93
49.5 X 49.5 X 4.5 49.50 4.5 5.95
60.0 X 60.0 X 3.2 60.00 3.2 5.50
60.0 X 60.0 X 3.6 60.00 3.6 6.11
60.0 X 60.0 X 4.5 60.00 4.5 7.43
72.0 X 72.0 X 3.2 72.00 3.2 6.71
72.0 X 72.0 X 4.0 72.00 4.0 8.22
72.0 X 72.0 X 4.8 72.00 4.8 9.66
80.0 X 80.0 X 3.2 80.00 3.2 7.51
80.0 X 80.0 X 4.0 80.00 4.0 9.22
80.0 X 80.0 X 4.8 80.00 4.8 10.87
91.5 X 91.5 X 3.6 91.50 3.6 9.67
91.5 X 91.5 X 4.5 91.50 4.5 11.88
91.5 X 91.5 X 5.4 91.50 5.4 14.01
100 X 100 X 4.0 100.00 4.0 11.74
100 X 100 X 5.0 100.00 5.0 14.41
100 X 100 X 6.0 100.00 6.0 16.98
113.5 X 113.5 X 4.5 113.50 4.5 14.99
113.5 X 113.5 X 4.8 113.50 4.8 15.92
113.5 X 113.5 X 5.4 113.50 5.4 17.74
132 X 132 X 4.8 132.00 4.8 18.71
132 X 132 X 5.4 132.00 5.4 20.88
150 X 150 X 4.0 150.00 4.0 18.01
150 X 150 X 5.0 150.00 5.0 22.26
150 X 150 X 6.0 150.00 6.0 26.40

Steel Grade Available - YST 210/YST 240/YST 310

Can Roll in Specified Thickness and Length also

Tolerances :
The following tolerances shall be permitted on Hollow Section.
a) Thickness ±10%
Outside Dimensions of sides ±1%
with a minimum of ±0.5 mm
c) Weight
1. On individual lengths

2. On lots of 10 tonne

+10%
-8%
±7.5%
d) Squareness of Corner 90°±2°
e) Radius of corners outside R=3T Max, where T is the thickness of the section.

General Applications :

* Industrial sheds
* Steel furniture
* Bridges
* Low cost steel housing
* Towers
* Airports
* Tripper/Trailer body
* Bus body structures
* Cranes
* Material storage rakes
* Road dividers
* Railway wagon/coaches
* Hoardings
* Machine components & frames
* Pre-fabricate house
* Automobile chassis

RHS

Hollow Section Steel Tubes
Confirming To IS 4923/1997
Dimensions and Properties of Rectangular Hollow Section
Designation Depth of Section H Width of Sction B Thickness (T) Weight
D x B x T mm mm mm mm kg/m
50.0 X 25.0 X 2.9 50 25 2.9 2.98
50.0 X 25.0 X 3.2 50 25 3.2 3.24
60.0 X 40.0 X 2.6 60 40 2.6 3.73
60.0 X 40.0 X 2.9 60 40 2.9 4.12
60.0 X 40.0 X 3.6 60 40 3.6 4.98
66.0 X 33.0 X 2.6 66 33 2.6 3.69
66.0 X 33.0 X 2.9 66 33 2.9 4.07
66.0 X 33.0 X 3.6 66 33 3.6 4.93
66.0 X 33.0 X 4.5 66 33 4.5 5.95
80.0 X 40.0 X 2.9 80 40 2.9 5.03
80.0 X 40.0 X 3.2 80 40 3.2 5.50
80.0 X 40.0 X 4.0 80 40 4.0 6.71
96.0 X 48.0 X 3.2 96 48 3.2 6.71
96.0 X 48.0 X 4.0 96 48 4.0 8.22
96.0 X 48.0 X 4.8 96 48 4.8 9.66
100.0 X 50.0 X 3.2 100 50 3.2 7.01
100.0 X 50.0 X 4.0 100 50 4.0 8.59
122.0 X 61.0 X 3.6 122 61 3.6 9.67
122.0 X 61.0 X 4.5 122 61 4.5 11.88
122.0 X 61.0 X 5.4 122 61 5.4 14.01
145.0 X 82.0 X 4.8 145 82 4.8 15.92
145.0 X 82.0 X 5.4 145 82 5.4 17.74
172.0 X 92.0 X 4.8 172 92 4.8 18.71
172.0 X 92.0 X 5.4 172 92 5.4 20.88
200.0 X 100.0 X 4.0 200 100 4.0 18.01
200.0 X 100.0 X 5.0 200 100 5.0 22.26
200.0 X 100.0 X 6.0 200 100 6.0 26.40

Steel Grade Available - YST 210/YST 240/YST 310

Can Roll in Specified Thickness and Length also

Tolerances :
The following tolerances shall be permitted on Hollow Section.
a) Thickness ±10%
Outside Dimensions of sides ±1%
with a minimum of ±0.5 mm
c) Weight
1. On individual lengths

2. On lots of 10 tonne

+10%
-8%
±7.5%
d) Squareness of Corner 90°±2°
e) Radius of corners outside R=3T Max, where T is the thickness of the section.